![]() |
Place of Origin | China |
Brand Name | TOWKING |
Certification | ISO9001 |
Model Number | 760126 |
14inch 12V Built-in Rain Shield Power Lift RV Roof Vent With Remote And Rain Sensor
This roof vent has a built-in 12V fan that uses a thermostat to help maintain an even temperature inside your RV, camper, or enclosed trailer. You can also control the dome and fan manually with a built-in hand knob or with controls on the vent housing. A rain sensor is included as well to signal the dome to close and the fan to shut off when it gets wet.
Air out your RV after cooking or just draw in some fresh air while you sleep. This variable-speed ceiling fan operates in 2 modes: manual and automatic.
To control the fan manually, turn the speed knob on the vent housing. There are 3 speeds: low, medium, and high. There is also an off position.
1. Color&Material
Smoke-colored polycarbonate dome filters UV rays while allowing light in
White interior ABS trim and roof flange are included
2. Built-in Rain Shield
The built-in rain shield on this powered roof vent protects the interior of your RV or camper from rainwater. Allows you to open the vent and operate the fan in any weather. Eliminates the need to install a separate vent cover
3. Power Lift
This vent fan has a powered lift arm for the dome, so you don't have to manually crank it open or closed. The dome automatically opens when you turn on the fan.
4. Rain Sensor
A moisture sensor ensures that the dome will close when rain or snow hits. So you can leave the vent running or preset it to run at a certain temperature, even if the forecast calls for rain. When the sensor gets wet, it signals the dome to close. With the dome closed, the fan blades will stop running.
5. Screen
Screen keeps insects out and easily detaches for cleaning
6. Installation
Smooth edges won't cut you during installation
Simple installation with 2-wire design
Hardware included
Item No. |
Speeds |
RPM |
Thermostat |
Rain Sensor |
Remote |
760125 |
Three Fan Blade Speeds |
1200/M |
4A Slow Melted |
No |
No |
760126 |
Three Fan Blade Speeds |
1200/M |
4A Slow Melted |
Yes |
Yes |
FAQ
Q: What's your Lead Time of mass production?
A: Normally our lead time is 30-45 days.
Q: Can you provide free samples?
A: Yes, one or two free samples are available.
Q: What's your MOQ?
A: Normally, for jack, the MOQ is 200pcs, while for winches, hitches, bike carriers, and other accessories, it will be 500pcs. Of course, the price will be different according to different quantity.
Q: What's your Payment Terms?
A: T/T and L/C are OK, but for small order we prefer 100% T/T before shipment.
Q: Can we customize according to our request?
A: Yes, as we also have strong R&D capability .And we could develop new production according to your request.
Contact Us at Any Time